RTU-710T
Radio Slave Station TETRA
On-off inputs:
The module's 16 opto-isolated on-off inputs can be connected in groups of 4 for +ve or -ve polarity. Each input is assigned a 16-bit counter that can be used as a time totalizer or event counter at up to 10 pulses/sec, if and as required.
On-off outputs:
The on-off outputs are opto-isolated PNP transistors (+ve switching) rated for loads up to 500 mA, 12-24 VDC.
Analog inputs:
These inputs accept 0-20 mA or 4-20 mA sensor/transmitter signals that are digitized with 12-bit resolution.
I/O Expansion:
RTU-710T modules have an I/O expansion bus interface through which Type PEM I/O Expansion Modules can be connected, to increase the I/Os available. Every time the RTU module is started up, it automatically scans this bus interface to check what Expansion Modules are connected, and their I/O configurations.
Technical Data: RTU-710T
Radio Slave RTU Stations with On-Off and Analog I/O
Funktion: | TETRA remote I/O station with on-off and analog inputs, and on-off outputs. |
RF transmit power level | Pout : 1 Watt |
Frequency range: | Tetra Standard |
On-off inputs: | 16 on-off inputs, opto-isolated,potential-free. Auxiliary functions: Time totalizer function available on 8 inputs Event counter function available on 8 inputs |
On-off outputs: | 8 (optionally 16) on-off outputs, PNP, opto-isolated, potential-free |
Analog inputs: | 4 analog inputs, 0-10 VDC / 0-20 mA / 4-20 mA Auxiliary functions: · Minimum value (valley) detection Maximum value (peak) detection Averaging |
I/O expansion interface:: | Supports up to 16 daisy-chained Type PEM I/O Extension Modules |
RF field strength indication: | LED bar-graph display of received RF signal strength. |
Power supply voltage: | 12 - 24 VDC +/- 20% |
Enclosure: | Aluminum pressure die-cast housing, DIN rail mounting. Protection class: IP-65 |
Dimensions without clip | 80 x 162 x 62 mm |
Operating temperature: | -20ºC to +70ºC |